Nissan Juke Service and Repair Manual : SRS Airbag Control System

Disposal of air bag module
Driver air bag module : Deployment CHECKING DEPLOYMENT TOOL Connecting to Battery CAUTION: The battery must show voltage of 9.6 V or more. Remove the battery from the vehicle and place it on dry ...

Other materials:

Hood switch
Component Function Check 1.CHECK FUNCTION 1. Select HOOD SW in Data Monitor mode of IPDM E/R using CONSULT-III. 2. Check HOOD SW indication under the following condition. Is the indication normal? YES >> Hood switch is OK. NO >> Go to SEC-223, "Diagnosis Procedure& ...

P0131 A/F sensor 1
DTC Logic DTC DETECTION LOGIC To judge the malfunction, the diagnosis checks that the A/F signal computed by ECM from the A/F sensor 1 signal is not inordinately low. DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If DTC Confirmation Procedure has been previously conducted, always turn ign ...

Front seat belt
Exploded View 1. Adjuster cover 2. Anchor bolt 3. Shoulder anchor 4. Spacer 5. Retaining washer 6. Seat belt adjuster 7. Seat belt pre-tensioner retractor (Passenger side) 8. Outer anchor 9. Seat belt pre-tensioner retractor (Driver side) 10. Seat belt buckle 11. Wave washer &n ...