Nissan Leaf 2018-2025 (ZE1) Owner's Manual : Instruments and controls
- Cockpit
- Instrument Panel
- Meters and Gauges
- Speedometer and odometer
- Li-ion battery temperature gauge
- Power meter
- Li-ion battery available charge gauge
- Warning lights, indicator lights and audible reminders
- Warning/Indicator light
- Warning/Indicator lights (red)
- Warning/Indicator lights (yellow)
- Warning/Indicator lights (other)
- Audible reminders
- Vehicle information display
- Vehicle information display warnings and indicators
- Warning information displays (models with a navigation system)
- Security systems
- Wiper and washer switch
- Rear window and outside mirror defroster switch
- Headlight and turn signal switch
- Horn
- Heated seat switches
- Heated steering wheel switch
- Emergency call (SOS) button
- Dynamic driver assistance switch (for vehicles without ProPILOT Assist)
- Rear Door Alert
- Power outlet
- USB/iPod charging ports
- Storage
- Windows
- Interior lights
Supplemental air bag warning labels
Supplemental front-impact air bag system warning labels
Supplemental air bag warning light
The supplemental air bag warning light, ...
Cockpit
TRIP RESET switch for twin trip odometer
Instrument brightness control switch
Headlight, fog light (if so equipped), and turn signal switch
...
Other materials:
P047B exhaust gas pressure sensor 2
DTC Logic
DTC DETECTION LOGIC
Diagnosis Proce
1.CHECK GROUND CONNECTIONS
1. Turn ignition switch OFF and wait at least 20 seconds.
2. Check ground connection E38. Refer to Ground inspection in GI-44, "Circuit
Inspection".
Is the inspection result normal?
YES >> GO TO 2.
...
P1212 TCS communication line
Description
This CAN communication line is used to control the smooth engine operation
during the TCS operation. Pulse
signals are exchanged between ECM and “ABS actuator and electric unit (control
unit)�.
Be sure to erase the malfunction information such as DTC not only for “ABS
ac ...
Rear wiper motor circuit
Component Function Check
1.CHECK REAR WIPER ON OPERATION
CONSULT-III ACTIVE TEST
1. Select “RR WIPER� of BCM active test item.
2. With operating the test item, check rear wiper operation.
On : Rear wiper ON operation
Off : Stop the rear wiper.
Is rear wiper operation normally?
YES >&g ...
