Nissan Leaf 2018-2025 (ZE1) Owner's Manual : Li-ion battery temperature gauge
This gauge provides a real-time monitor for the operating temperature of the high-voltage Li-ion battery pack.
The battery temperature is considered to be within the optimal operating range when the indicator is located within the designated zone 1 as depicted in the illustration.
Please note that the Li-ion battery temperature fluctuates naturally based on current driving intensity, the rate of charge, and the prevailing outside air temperature.
NOTE:
- If the gauge indicates that the Li-ion battery temperature is approaching the upper red zone, we recommend reducing your vehicle speed to allow the temperature to normalize. If the indicator exceeds the normal operating range, the vehicle will trigger the power limitation indicator light, and the traction motor's output will be automatically reduced to protect the battery pack.
Consequently, you will notice that the Nissan Leaf feels less responsive to accelerator input while the power limitation light remains illuminated.
- In conditions where the outside temperature is extremely low, the Li-ion temperature gauge may not register a reading initially. In such cases, the vehicle may be unable to enter the "READY to drive" mode. If this persists, please have the battery management system inspected by a NISSAN certified LEAF dealer for professional service.
Speedometer and odometer
Your Nissan Leaf is equipped with a high-visibility digital speedometer and a precise odometer system. The speedometer is positioned conveniently on the right side of the main vehicle information disp ...
Power meter
This dynamic gauge provides a clear visual representation of your Nissan Leaf's energy flow. It specifically monitors the actual traction motor power consumption (A) and tracks t ...
Other materials:
Main line betweeN DLC and MDU circuit
Diagnosis Procedure
1.CHECK HARNESS CONTINUITY (OPEN CIRCUIT)
1. Turn the ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Disconnect the following harness connectors.
- ECM
- Multi display unit
4. Check the continuity between the data link connector and the ...
Diagnosis system (BCM) (without intelligent key system)
Common item : consult-III Function (BCM - COMMON ITEM)
APPLICATION ITEM
CONSULT-III performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions for each system.
NOTE:
It can perform the diagnosis modes except the following for ...
Front door
Exploded View
1. Front door panel
2. Grommet
3. TORX bolt
4. Door striker
5. Door pad
6. Bumper rubber
7. Door check link
8. Door hinge (lower)
9. Door hinge (upper)
10. Grommet
: Do not reuse
: N·m (kg-m, in-lb)
: N·m (kg-m, ft-lb)
: Body grease
Door assembly
DOOR ASSEMBLY ...
