Nissan Leaf 2018-2025 (ZE1) Owner's Manual : Speedometer and odometer
Your Nissan Leaf is equipped with a high-visibility digital speedometer and a precise odometer system. The speedometer is positioned conveniently on the right side of the main vehicle information display, while the odometer and trip data are integrated directly into the vehicle information screen for easy reference while driving.
Speedometer
The digital speedometer provides a clear, real-time indication of your current driving speed.
Odometer/twin trip odometer
The odometer and twin trip odometers are viewable on the vehicle information display whenever the power switch is in either the ON or the "READY to drive" position.
The odometer continuously records the cumulative total distance the Nissan Leaf has traveled since its manufacture.
The twin trip odometers allow you to track the distance of specific individual journeys or tasks independently.
Changing the display:
Pressing the TRIP RESET switch located on the left side of the instrument panel cycles the display through the following sequence: Odometer → TRIP A → TRIP B → Odometer.
For more comprehensive details on customizing or viewing the vehicle information display, please see the "Vehicle information display" section of this manual.
Resetting the trip odometer:
By pressing and holding the TRIP RESET switch for approximately 1 second, the currently selected trip odometer will be reset to zero.
Meters and Gauges
Vehicle information display:
Digital clock
Outside air temperature reading
Li-ion battery available charge gauge
Est ...
Li-ion battery temperature gauge
This gauge provides a real-time monitor for the operating temperature of the high-voltage Li-ion battery pack.
The battery temperature is considered to be within the optimal ...
Other materials:
Headlight switch
Type A (if so equipped)
Rotate the switch to the
position; this activates the front parking lights, tail lights, license plate illumination, and the interior instrument panel lighting.
Rotate the switch to the
...
B1089 seat belt Pre-tensioner LH
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.CHECK SELF-DIAG RESULT
With CONSULT-III
1. Turn ignition switch ON.
2. Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT-III.
Without CONSULT-III
1. Turn ignition switch ON.
2. Check the air bag warning la ...
Wiring diagram
MANUAL AIR CONDITIONING SYSTEM
Wiring Diagram
For connector terminal arrangements, harness layouts, and alphabets in a
(option abbreviation; if not
described in wiring diagram), refer to GI-12, "Connector Information/Explanation
of Option Abbreviation".
...
