Nissan Juke Owners Manual : Heater, air conditioner, audio and phone systems
- Safety note
- Control panel buttons — color screen with navigation system (if so equipped)
- How to use touch screen
- How to use the BACK button
- How to use brightness control and display ON/OFF button
- How to use the setup button
- RearView monitor (if so equipped)
- Ventilators
- Heater and air conditioner
- Manual air conditioner (if so equipped)
- Automatic air conditioner (with Integrated Control System)
- Operating tips (for automatic air conditioner)
- In-cabin microfilter
- Servicing air conditioner
- Audio system
- Audio operation precautions
- FM-AM-SAT radio with Compact Disc (CD) player (Type A)
- FM-AM-SAT radio with Compact Disc (CD) player (Type B)
- CD/USB memory care and cleaning
- Steering wheel switch for audio control
- Antenna
- Car phone or CB radio
- Bluetooth® Hands-Free Phone System
Vanity mirror
To use the front vanity mirror, pull down the sun visor and pull up the cover. ...
Safety note
WARNING
• Do not disassemble or modify this system. If you do, it may result in accidents,
fire, or electric shock.
• Do not use this system if you notice any abnormality, such as a frozen screen ...
Other materials:
System
Starting system (with intelligent key) : System Diagram
*1: M/T models
*2: CVT models
Starting system (with intelligent key) : System Description
CVT MODELS
• When selector lever is P or N, power is supplied to starter relay and
starter control relay by transmission
range switch. And BCM a ...
Keyfob battery
Exploded View
1. Upper case
2. Key
3. Switch cover
4. Switch rubber
5. Board surface
6. Battery
7. plate
8. Lower case
9. Screw
Removal and Installation
REMOVAL
1. Remove screw (9) on the rear of keyfob.
2. Place the key with the lower case (8) facing up. Set a screw-driver wrap ...
P0725 engine speed
Description
The engine speed signal is transmitted from ECM to TCM by CAN communication
line.
DTC Logic
DTC DETECTION LOGI
DTC CONFIRMATION PROCEDURE
CAUTION:
Always drive vehicle at a safe speed.
NOTE:
If “DTC CONFIRMATION PROCEDURE” has been previously performed, always turn
ignition ...