Center ventilators

Adjust the air flow direction of ventilators as illustrated. Adjust the air flow direction of the ventilators by moving the center knob (up/down and left/right) until the preferred position is ac ...

Heater and air conditioner

WARNING •  The air conditioner cooling function operates only when the engine is running. • Do not leave children or adults who would normally require the support of others alone in your ve ...

Other materials:

S mode indicator
Component Function Check 1.CHECK S MODE INDICATOR FUNCTION Check S mode indicator turns ON for approx. 2 seconds when ignition switch turns ON. Is the inspection results normal? YES >> INSPECTION END NO >> Go to TM-469, "Diagnosis Procedure". Diagnosis Procedure 1.CH ...

System
System Diagram System Description DESCRIPTION • Manual air conditioning system is controlled by each function of thermo control amp., BCM, ECM and IPDM E/R. • Fan speed of blower motor is changed by the combination of fan control dial operation and blower fan resistor control. CONTROL ...

Fuel level sensor signal circuit
Component Function Check 2WD MODELS 1.CHECK COMBINATION METER OUTPUT SIGNAL Select the “Data Monitor” for the “METER/M&A” and compare the “FUEL METER” monitor value with the fuel gauge reading on the combination meter. Does monitor value match fuel gauge reading? YES >> INSPECTIO ...