How to use touch screen

CAUTION • The glass screen on the liquid crystal display may break if it is hit with a hard or sharp object. If the glass screen breaks, do not touch it. Doing so could result in an injury. • To ...

How to use brightness control and display ON/OFF button

To change the display brightness, push the button. Pushing the button again will change the display to the day or the night display. If no operation is performed within 5 seconds, the display wil ...

Other materials:

Vehicle security alarm does not activate
Description Alarm does not operate when alarm operating condition is satisfied. NOTE: Check that vehicle is under the condition shown in “CONDITIONS OF VEHICLE (OPERATING CONDITIONS)” before starting diagnosis, and check each symptom. CONDITION OF VEHICLE (OPERATING CONDITIONS) “SECURITY ...

Both side headlamps (HI) are not turned on
Description Both side headlamps (HI) are not turned ON when setting to the lighting switch HI or PASS. Diagnosis Procedure 1.COMBINATION SWITCH INSPECTION Check the combination switch. Refer to BCS-92, "Symptom Table". Is the inspection result normal? YES >> GO TO 2. NO ...

Map light control switch (if so equipped)
The map lights control switch has three positions: ON1 , OFF2 and center. ON position When the switch is in the ON position 1 , the map lights will illuminate. OFF position When the switch is in the OFF position2 , the map lights will not illuminate, regardless of the condition. Center posi ...