Nissan Juke Owners Manual : Pre-driving checks and adjustments
- Keys
- Doors
- Locking with key
- Locking with inside lock knob
- Locking with power door lock switch
- Automatic door locks
- Child safety rear door lock
- Remote keyless entry system (if so equipped)
- Intelligent Key system (if so equipped)
- Intelligent Key operating range
- Door locks/unlocks precaution
- Intelligent Key operation
- Battery saver system
- Warning lights and audible reminders
- Troubleshooting guide
- How to use remote keyless entry function
- Hood
- Lift gate
- Front side and rear unique parts (NISMO models)
- Fuel-filler door
- Tilt steering column
- Sun visors
- Mirrors
Cargo light
The cargo room lights illuminate when the lift gate is opened. When the lift
gate is closed, the lights will turn off. ...
Keys
A key number plate is supplied with your keys.
Record the key number and keep it in a safe place (such as your wallet), not
in the vehicle. If you lose your keys, see a NISSAN dealer for duplicates ...
Other materials:
PTC branch line circuit
Diagnosis Procedure
1.CHECK CONNECTOR
1. Turn the ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Check the terminals and connectors of the PTC heater control unit for damage,
bend and loose connection
(unit side and connector side).
Is the inspection re ...
ANTI-HIJACK function does not operate
Diagnosis Procedure
1.CHECK “DOOR LOCK–UNLOCK SET” SETTING IN “WORK SUPPORT”
1. Select “DOOR LOCK” of “BCM” using CONSULT-III.
2. Select “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT” mode.
3. Check “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT”
Refer to DLK-371, "DOOR LOCK : CONSULT-III Function (BCM ...
B2098 ignition relay on stuck
Description
• IPDM E/R operates the ignition relay when it receives an ignition switch ON
signal from BCM via CAN communication.
• Turn the ignition relay OFF by pressing the push-button ignition switch once
when the vehicle speed is 4 km/
h (2.5 MPH) or less.
• Turn the ignition relay OFF w ...
