Nissan Juke Service and Repair Manual : Front Axle K9K

Service data and specifications (SDS)
Wheel Bearing Drive Shaft M/T *: For measuring position, refer to FAX-54, "WHEEL SIDE : Disassembly and Assembly" (Wheel side), FAX- 56, "TRANSAXLE SIDE : Disassembly and Asse ...

Other materials:

C1140 actuator relay system
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test. >> GO TO 2. 2.CHECK DTC DETECTION With CONSULT ...

Precaution
Precautions for Suspension • When installing rubber bushings, the final tightening must be carried out under unladen conditions with tires on ground. Spilled oil might shorten the life of rubber bushings. Be sure to wipe off any spilled oil. - Unladen conditions mean that fuel, engine coolant ...

Shift position indicator circuit
Component Parts Function Inspection 1.CHECK SHIFT POSITION INDICATOR 1. Start the engine. 2. Shift selector lever. 3. Check that the selector lever position and the shift position indicator on the combination meter are identical. Is the inspection result normal? YES >> INSPECTION END ...