Basic inspection

DIAGNOSIS AND REPAIR WORK FLOW Work Flow DETAILED FLOW 1.OBTAIN INFORMATION ABOUT SYMPTOM Interview the customer to obtain the malfunction information (conditions and environment when the malfun ...

Rear window defogger switch

With auto A/C WITH AUTO A/C : Description • The rear window defogger is operated by turning the rear window defogger switch ON. • The indicator lamp in the rear window defogger switch illuminates ...

Other materials:

Washer switch
Component Inspection 1.CHECK WASHER SWITCH 1. Turn ignition switch OFF. 2. Disconnect combination switch connector. 3. Check continuity between the combination switch terminals. A : Terminal 4 B : Terminal 6 C : Terminal 3 D : Terminal 1 Is the inspection result normal? YES >> IN ...

Compression pressure
Inspection 1. Warm up engine thoroughly. Then, stop it. 2. Release fuel pressure. Refer to EC-551, "Work Procedure". 3. Remove ignition coil and spark plug from each cylinder. Refer to EM-53, "Exploded View". 4. Connect engine tachometer (not required in use of CONSULT-II ...

Secondary speed sensor
Exploded View 1. Transaxle assembly 2. O-ring 3. Secondary speed sensor : Vehicle front : Always replace after every disassembly. : N·m (kg-m, in-lb) : Genuine NISSAN CVT Fluid NS-2 Removal and Installation REMOVAL 1. Disconnect battery cable from negative terminal. Refer to PG-124, ...