Nissan Juke Service and Repair Manual : System description

Component parts
CVT control system : Component Parts Location 1. Multi display unit (MDU)* Refer to DMS-3, "Component Parts Location". 2. Combination meter 3. Manual mode indicator (On the combinatio ...

Other materials:

Ring gear shaft
Exploded View 1. Pinion lock nut 2. Companion flange 3. Drive pion oil seal 4. Pinon rear bearing 5. Transfer case 6. Gasket 7. Filler plug 8. Collapsible spacer 9. Drive pinion adjust shim 10. Drive pinion 11. Pinion front bearing 12. Ring gear 13. Ring gear shaft 14. Ring ...

Power supply and ground circuit
Diagnosis Procedure 1.CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) IGNITION POWER SUPPLY 1. Turn the ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) harness connector. 3. Check voltage between ABS actuator and electric unit (control unit) harness conne ...

Precaution Necessary for Steering Wheel Rotation after Battery Disconnect
NOTE: Before removing and installing any control units, first turn the ignition switch to the LOCK position, then disconnect both battery cables. After finishing work, confirm that all control unit connectors are connected properly, then re-connect both battery cables. Always use CONS ...