Nissan Juke Service and Repair Manual : Symptom diagnosis

ESP off indicator lamp
Component Function Check 1.CHECK ESP OFF INDICATOR LAMP FUNCTION (1) Check that ESP OFF indicator lamp in combination meter turns ON for approx. 1 second after ignition switch is turned ON. CA ...

Excessive operation frequency
Description ESP function, TCS function, ABS function, EBD function and brake limited slip differential (BLSD) function operates in excessive operation frequency. Diagnosis Procedure 1.CHECK BRAK ...

Other materials:

Shift P warning lamp
Component Function Check 1.CHECK FUNCTION 1. Select “INTELLIGENT KEY” of “BCM” using CONSULT-III. 2. Select “LCD” in “ACTIVE TEST” mode. 3. Check that the function operates normally according to the following conditions. Is the inspection result normal? YES >> Shift P ...

Precaution for On Board Diagnosis (OBD) System of CVT and Engine
The ECM has an on board diagnostic system. It will light up the malfunction indicator (MI) to warn the driver of a malfunction causing emission deterioration. CAUTION: • Be sure to turn the ignition switch OFF and disconnect the battery cable from the negative terminal before any repair ...

P0197, P0198 EOT sensor
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If DTC Confirmation Procedure has been previously conducted, always perform the following procedure before conducting the next test. 1. Turn ignition switch OFF and wait at least 10 seconds. 2. Turn ignition swit ...