Brake warning lamp

Component Function Check 1.CHECK BRAKE WARNING LAMP FUNCTION (1) Check that brake warning lamp in combination meter turns ON for approx. 1 second after ignition switch is turned ON. CAUTION: ...

Excessive operation frequency

Description ABS function and EBD function operates in excessive operation frequency. Diagnosis Procedure 1.CHECK BRAKING FORCE Check brake force using a brake tester. Is the inspection result n ...

Other materials:

Warning lights
All-Wheel Drive (AWD) warning light (AWD model) When the ignition switch is in the “ON” position, the All-Wheel Drive (AWD) warning light will illuminate. It will turn off soon after the engine is started. If the AWD system malfunctions or the revolution or radius of the front and the rear ...

Intelligent key low battery warning does not operate
Diagnosis Procedure 1.CHECK DTC WITH BCM AND COMBINATION METER Check that DTC is not detected with BCM and combination meter. Is the inspection result normal? YES >> GO TO 2. NO-1 >> Refer to BCS-67, "DTC Index". (BCM) NO-2 >> Refer to MWI-36, "DTC Index&qu ...

B2626 outside antenna
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PERFORM DTC CONFIRMATION PROCEDURE 1. Disconnect outside key antenna (driver side) connector. 2. Perform “INTELLIGENT KEY” Self Diagnostic Result. Is outside key antenna DTC detected? YES >> Refer to DLK-61, "Diagnosis ...