Battery charging chart

Slow Charge 1.DETERMINE INITIAL CHARGING CURRENT 1. Determine initial charging current from specific gravity. 2. Check battery type and determine the specified current using the table. NOTE: Af ...

Battery

Exploded View 1 : Battery fix frame :N·m (kg-m, in-lb) Removal and Installation REMOVAL 1. Disconnect the battery cable from the negative terminal. CAUTION: When disconnecting, disconnect ...

Other materials:

Changing wheels and tires
Tire rotation NISSAN recommends rotating the tires every 5,000 miles (8,000 km). (See “Flat tire”  for tire replacing procedures.) As soon as possible, tighten the wheel nuts to the specified torque with a torque wrench. Wheel nut tightening torque: 80 ft-lb (108 N·m) The wheel ...

Consult-III/GST checking system
Description • When CONSULT-III/GST is connected with a data link connector (A) equipped on the vehicle side, it will communicate with the control unit equipped in the vehicle and then enable various kinds of diagnostic tests. 1 : Instrument lower panel RH • Refer to CONSULT-III Software O ...

LAN System can system (type 2)
DTC/circuit diagnosis Main line between IPDM-E AND DLC circuit Diagnosis Procedure 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the following terminals and connectors for damage, bend and loose connection (connector s ...