Symptom diagnosis

Squeak and rattle trouble diagnoses Work Flow CUSTOMER INTERVIEW Interview the customer if possible, to determine the conditions that exist when the noise occurs. Use the Diagnostic Worksheet ...

Front door finisher

Exploded View LHD models 1. Front door panel 2. Front door finisher 3. Cap 4. Pull handle 5. Power window switch finisher 6. Pull handle bracket : Clip : Pawl : Metal clip Removal and ...

Other materials:

P012B TC boost sensor
DTC Logic DTC DETECTION LOGIC Diagnosis Procedure 1.CHECK GROUND CONNECTIONS 1. Turn ignition switch OFF. 2. Check ground connection E38. Refer to Ground inspection in GI-44, "Circuit Inspection". Is the inspection result normal? YES >> GO TO 2. NO >> Repair or ...

CVT control system
Wiring diagram For connector terminal arrangements, harness layouts, and alphabets in a (option abbreviation; if not described in wiring diagram), refer to GI-12, "Connector Information/Explanation of Option Abbreviation". ...

Nats antenna AMP
Removal and Installation REMOVAL 1. Remove the cluster lid A. Refer to IP-13, "Removal and Installation". 2. Remove the NATS antenna amp. 1. Disengage the NATS antenna amp. (1) fixing pawls using minus driver etc. 2. Pull NATS antenna amp. to remove it from push-button ignition sw ...