Fuel system HR16DE

...

General Precautions

WARNING: When replacing fuel line parts, be sure to observe the following. • Put a “CAUTION: FLAMMABLE” sign in the workshop. • Be sure to work in a well ventilated area and furnish workshop with ...

Other materials:

Lubricant
Description MAINTENANCE OF LUBRICANT LEVEL The compressor lubricant is circulating in the system together with the refrigerant. It is necessary to fill compressor with lubricant when replacing A/C system parts or when a large amount of refrigerant leakage is detected. It is important to alwa ...

B1037, B1039, B1041 crash zone sensor
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAG RESULT With CONSULT-III 1. Turn ignition switch ON. 2. Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT-III. Without CONSULT-III 1. Turn ignition switch ON. 2. Check the air bag warning lamp statu ...

License plate lamp circuit
Without daytime running light system WITHOUT DAYTIME RUNNING LIGHT SYSTEM : Component Function Check 1.CHECK TAIL LAMP (RH) OPERATION Check that the tail lamp (RH) is turned ON. Is the inspection result normal? YES >> GO TO 2. NO >> Check tail lamp circuit. Refer to EXL-61, &qu ...