Nissan Juke Service and Repair Manual : Periodic maintenance

FUEL SYSTEM

Inspection

Inspect fuel lines, fuel filler cap, and fuel tank for improper attachment, leakage, cracks, damage, loose connections, chafing or deterioration.

A : Engine
B : Fuel line
C : Fuel tank

If necessary, repair or replace damaged parts.

Quick Connector


Quick Connector

CAUTION:
After connecting fuel tube quick connectors, check quick connectors are secure.

Ensure that connector and resin tube never contact any adjacent parts.

    Other materials:

    B2192 ID discord, IMMU-ECM
    DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PERFORM DTC CONFIRMATION PROCEDURE 1. Turn ignition switch ON. 2. Check DTC in Self Diagnostic Result mode of BCM using CONSULT-III. Is DTC detected? YES >> Go to SEC-60, "Diagnosis Procedure". NO >> I ...

    BCM branch line circuit
    Diagnosis Procedure 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the terminals and connectors of the BCM for damage, bend and loose connection (unit side and connector side). Is the inspection result normal? YES &g ...

    Accelerator pedal released position learning
    Description Accelerator Pedal Released Position Learning is a function of ECM to learn the fully released position of the accelerator pedal by monitoring the accelerator pedal position sensor output signal. It must be performed each time harness connector of accelerator pedal position sensor ...