Periodic maintenance

FUEL SYSTEM Inspection Inspect fuel lines, fuel filler cap, and fuel tank for improper attachment, leakage, cracks, damage, loose connections, chafing or deterioration. A : Engine B : Fuel line ...

Fuel level sensor unit, fuel filter and fuel pump assembly

Exploded View 1. Fuel tank 2. Rock ring 3. Fuel level sensor unit, fuel filter and fuel pump assembly 4. O-ring : Vehicle front : Always replace after every disassembly. : N·m (kg-m, ...

Other materials:

Automatic door locks
All doors lock automatically when the vehicle speed reaches 15 MPH (24 km/h). • All doors unlock automatically when the ignition switch is placed in the OFF position (models with Intelligent Key system). •  All doors unlock automatically when the key is removed from the ignition switch (m ...

P0743 torque converter
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE CAUTION: Be careful of the driving speed. 1.PREPARATION BEFORE OPERATION (PART 1) If another "DTC CONFIRMATION PROCEDURE" occurs just before, turn ignition switch OFF and wait for at least 10 seconds, then perform the next ...

Drive belt
Checking • Inspection should be done only when engine is cold or over 30 minutes after the engine is stopped. 1 : Alternator 2 : Water pump 3 : Crankshaft pulley 4 : A/C compressor 5 : Idler pulley 6 : Drive belt • Visually check belts for wear, damage, and cracks on inside and edges. ...