Service Notice or Precautions for EPS System

• Check the following item when performing the trouble diagnosis. - Check any possible causes by interviewing the symptom and it′s condition from the customer if any malfunction, such as ...

Component parts

Component Parts Location LHD models 1. Multi display unit* Refer to DMS-3, "Component Parts Location". 2. ABS actuator and electric unit (control unit) Refer to BRC-9, "Compone ...

Other materials:

B210C starter control relay
DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B210C is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to PCS-30, "DTC Logic". • When IPDM E/R power supply voltage is low (Approx. 7 - 8 V for about 1 second), the DTC B210C may be detected. ...

CSC (concentric slave cylinder)
Exploded View 1. Transaxle assembly 2. CSC (Concentric Slave Cylinder) : Always replace after every disassembly. : N·m (kg-m, ft-lb) Removal and Installation CAUTION: • Never reuse CSC (Concentric Slave Cylinder). Because CSC slides back to the original position every time when rem ...

Door lock actuator
Driver side : Component Function Check 1.CHECK FUNCTION 1. Select “DOOR LOCK” of “BCM” using CONSULT-III. 2. Select “DOOR LOCK” in “ACTIVE TEST” mode. 3. Check that the function operates normally according to the following conditions. Is the inspection result normal? YES &g ...