Both side front fog lamps are not turned on

Description The front fog lamps are not turned ON in any condition. Diagnosis Procedure 1.CHECK FUSE Check that the following fuse is fusing. Is the inspection result normal? YES >> GO T ...

Headlamp aiming adjustment

LHD LHD : Description PREPARATION BEFORE ADJUSTING NOTE: • For details, refer to the regulations in your own country. • Perform aiming if the vehicle front body has been repaired and/or the headl ...

Other materials:

Rear door glass
Exploded View 1. Rear door panel 2. Sealing screen 3. Lower sash (front) 4. Rear door regulator assembly 5. Power window motor 6. Rear door glass 7. Lower sash (rear) 8. Rear door glass run Removal and Installation REMOVAL 1. Fully open rear door glass. 2. Remove rear door finishe ...

Blower fan on signal
Component Function Check 1.CHECK BLOWER FAN ON SIGNAL With CONSULT-III 1. Turn ignition switch ON. 2. Select “AIR CONDITIONER” of “BCM” using CONSULT-III. 3. Select “FAN ON SIG” in “DATA MONITOR” mode, and check status under the following condition. Is the inspection result normal? YES &g ...

P0132 A/F sensor 1
DTC Logic DTC DETECTION LOGIC To judge the malfunction, the diagnosis checks that the A/F signal computed by ECM from the A/F sensor 1 signal is not inordinately high. DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If DTC Confirmation Procedure has been previously conducted, always perform ...