Rear window and outside mirror defroster switch

Type A Type B To defog/defrost the rear window glass and outside mirrors (if so equipped), start the engine and push the switch 1 on. The indicator light 2 will illuminate. Push the switch a ...

Headlight switch

Lighting 1 Turn the switch to the position: The front parking, side marker, tail, license plate, instrument lights and daytime running lights (for NISMO models) will come on. 2 Turn the switch ...

Other materials:

P181D engine torque signal
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test. >> GO TO 2. 2.DTC REPRODUCTION PROCEDURE With ...

Precaution Necessary for Steering Wheel Rotation after Battery Disconnect
NOTE: • Before removing and installing any control units, first turn the ignition switch to the LOCK position, then disconnect both battery cables. • After finishing work, confirm that all control unit connectors are connected properly, then re-connect both battery cables. • Always use CONS ...

Rear-facing child restraint installation using the seat belts
WARNING The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not being properly secured. The restraint could tip over or be loose and cause injury to a child in a sudd ...