Nissan Juke Service and Repair Manual : Door does not lock/unlock with door request switch

Nissan Juke Service and Repair Manual / Door & Lock type 2 / Symptom diagnosis / Door does not lock/unlock with door request switch

All door request switches

ALL DOOR REQUEST SWITCHES : Description

All doors do not lock/unlock using all door request switches.

ALL DOOR REQUEST SWITCHES : Diagnosis Procedure

1.CHECK REMOTE KEYLESS ENTRY FUNCTION

Check remote keyless entry function.

Does door lock/unlock with Intelligent Key button? YES >> GO TO 2.

NO >> Refer to DLK-279, "Diagnosis Procedure".

2.CHECK “LOCK/UNLOCK BY I-KEY” SETTING IN “WORK SUPPORT”

1. Select “INTELLIGENT KEY” of “BCM” using CONSULT-III.

2. Select “LOCK/UNLOCK BY I-KEY” in “WORK SUPPORT” mode.

3. Check “LOCK/UNLOCK BY I-KEY” in “WORK SUPPORT”.

Refer to DLK-219, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY) (Without Super Lock)".

Is the inspection result normal? YES >> GO TO 3.

NO >> Set “LOCK/UNLOCK BY I-KEY” in “WORK SUPPORT”.

3.CHECK INSIDE KEY ANTENNA

Check inside key antenna.

• Instrument center: Refer to DLK-230, "DTC Logic".

• Console: Refer to DLK-232, "DTC Logic".

• Luggage room: Refer to DLK-234, "DTC Logic".

Is the inspection result normal? YES >> GO TO 4.

NO >> Repair or replace the malfunctioning parts.

4.CHECK OUTSIDE KEY ANTENNA

Check outside key antenna.

• Driver side: Refer to DLK-236, "DTC Logic".

• Passenger side: Refer to DLK-238, "DTC Logic".

• Rear bumper: Refer to DLK-240, "DTC Logic".

Is the inspection result normal? YES >> GO TO 5.

NO >> Repair or replace the malfunctioning parts.

5.REPLACE BCM

1. Replace BCM. Refer to BCS-93, "Removal and Installation".

2. Confirm the operation after replacement.

Is the result normal? YES >> INSPECTION END

NO >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".

Driver side door request switch

DRIVER SIDE DOOR REQUEST SWITCH : Description

All doors do not lock/unlock using driver side door request switch.

DRIVER SIDE DOOR REQUEST SWITCH : Diagnosis Procedure

1.CHECK DRIVER SIDE DOOR REQUEST SWITCH

Check driver side door request switch.

Refer to DLK-256, "Component Function Check".

Is the inspection result normal? YES >> GO TO 2.

NO >> Repair or replace the malfunctioning parts.

2.CHECK OUTSIDE KEY ANTENNA

Check outside key antenna (driver side).

Refer to DLK-236, "DTC Logic".

Is the inspection result normal? YES >> GO TO 3.

NO >> Repair or replace the malfunctioning parts.

3.REPLACE BCM

1. Replace BCM. Refer to BCS-93, "Removal and Installation".

2. Confirm the operation after replacement.

Is the result normal? YES >> INSPECTION END

NO >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".

Passenger side door request switch

PASSENGER SIDE DOOR REQUEST SWITCH : Des

All doors do not lock/unlock using passenger side door request switch.

PASSENGER SIDE DOOR REQUEST SWITCH : Diagnosis Procedure

1.CHECK PASSENGER SIDE DOOR REQUEST SWITCH

Check passenger side door request switch.

Refer to DLK-256, "Component Function Check".

Is the inspection result normal? YES >> GO TO 2.

NO >> Repair or replace the malfunctioning parts.

2.CHECK OUTSIDE KEY ANTENNA

Check outside key antenna (passenger side).

Refer toDLK-238, "DTC Logic".

Is the inspection result normal? YES >> GO TO 3.

NO >> Repair or replace the malfunctioning parts.

3.REPLACE BCM

1. Replace BCM. Refer to BCS-93, "Removal and Installation".

2. Confirm the operation after replacement.

Is the result normal? YES >> INSPECTION END

NO >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".

Back door request switch

BACK DOOR REQUEST SWITCH : Description

All doors do not lock/unlock using back door request switch.

BACK DOOR REQUEST SWITCH : Diagnosis Procedure

1.CHECK BACK DOOR REQUEST SWITCH

Check back door request switch.

Refer to DLK-246, "Component Function Check".

Is the inspection result normal? YES >> GO TO 2.

NO >> Repair or replace the malfunctioning parts.

2.CHECK OUTSIDE KEY ANTENNA

Check outside key antenna (rear bumper).

Refer to DLK-240, "DTC Logic".

Is the inspection result normal? YES >> GO TO 3.

NO >> Repair or replace the malfunctioning parts.

3.REPLACE BCM

1. Replace BCM. Refer to BCS-93, "Removal and Installation".

2. Confirm the operation after replacement.

Is the result normal? YES >> INSPECTION END

NO >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".

    Door does not lock/unlock with driver side door lock knob or door key cylinder
    Diagnosis Procedure 1.CHECK POWER DOOR LOCK OPERATION Check power door lock operation. Does door lock/unlock with door lock and unlock switch? YES >> GO TO 2. NO >> Refer to DLK-2 ...

    Other materials:

    System
    Manual air conditioning system : System Diagram Manual air conditioning system : System Description DESCRIPTION • Manual air conditioning system is controlled by each function of thermo control amp., BCM, ECM and IPDM E/R. • Fan speed of blower motor is changed by the combination of fan con ...

    Component parts
    Component Parts Location 1. Door request switch (driver side) 2. Door mirror (driver side) 3. Remote keyless entry receiver Refer to DLK-21, "Component Parts Location" 4. Door mirror remote control switch 5. BCM Refer to BCS-6, "BODY CONTROL SYSTEM : Component Parts Loca ...

    Operation inspection
    Work Procedure The purpose of the operational check is to check that the individual system operates normally. Check condition : Engine running at normal operating temperature. 1.CHECK MEMORY FUNCTION 1. Set temperature to 30°C by operating the temperature control dial. 2. Press OFF switch. 3 ...