Nissan Juke Service and Repair Manual : ATFTEMP count Conversion Table
Service Notice or Precaution
OBD SELF-DIAGNOSIS (WITH OBD) • CVT self-diagnosis is performed by the TCM in combination with the ECM. The results can be read through the blinking pattern of the malfunction indicator (MI). Refe ...Preparation
...Other materials:
CSC (concentric slave cylinder)
Exploded View
1. Transaxle assembly
2. CSC (Concentric Slave Cylinder)
: Always replace after every
disassembly.
: N·m (kg-m, ft-lb)
Removal and Installation
CAUTION:
• Never reuse CSC (Concentric Slave Cylinder). Because CSC slides back to the
original position
every time when removi ...
Combination switch
Exploded View
1. Combination switch
2. Combination switch connector
Removal and Installation
REMOVAL
1. Remove steering column cover. Refer to IP-13, "Removal and
Installation".
2. Remove screws.
3. Disconnect the connector.
4. Pull up the combination switch to remove it.
I ...
P1585 G sensor
Description
• G sensor is installed to floor under instrument lower cover.
• G sensor detects longitudinal G and inclination that affects the vehicle and
outputs to ECM using analog voltage.
ECM converts the analog voltage value to digital signal and transmits the signal
to TCM via CAN comm ...