Steering switch ground circuit

Description Transmits the steering switch signal to audio unit. Diagnosis Procedure 1.CHECK STEERING SWITCH SIGNAL GROUND CIRCUIT 1. Disconnect audio unit connector and spiral cable connector. 2. ...

Audio system symptoms

Models with USB connection function MODELS WITH USB CONNECTION FUNCTION : Symptom Table AUDIO SYSTEM RELATED TO HANDS-FREE PHONE • Check that the cellular phone is the corresponding type (Blueto ...

Other materials:

Line pressure test
Work Procedure INSPECTION 1. Check the engine oil level. Replenish if necessary. LU-25, "Inspection". 2. Check for leak of the CVT fluid. Refer to TM-480, "Inspection". 3. Drive for about 10 minutes to warm up the vehicle so that the CVT fluid temperature is 50 to 80°C (122 ...

The key warning does not sound (without intelligent key)
Description The key warning chime does not sound, when all of the following conditions are fulfilled. • Key inserted into the key cylinder (key switch signal ON). • Ignition switch is in ACC or OFF (ignition switch signal OFF). • Driver side door is open (driver side door switch ON) Diagnos ...

B2623 inside antenna
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PERFORM DTC CONFIRMATION PROCEDURE 1. Select “INTELLIGENT KEY” of “BCM” using CONSULT-III. 2. Select “INSIDE ANT DIAGNOSIS” in “WORK SUPPORT” mode. 3. Perform inside key antenna (“INSIDE ANT DIAGNOSIS”) on “WORK SUPPORT” of “INTELL ...