Front-seat Active Head Restraints

The Active Head Restraint moves forward utilizing the force that the seatback receives from the occupant in a rear-end collision. The movement of the head restraint helps support the occupant’s ...

Precautions on seat belt usage

If you are wearing your seat belt properly adjusted, and you are sitting upright and well back in your seat with both feet on the floor, your chances of being injured or killed in an accident and/ ...

Other materials:

Changing wheels and tires
Tire rotation NISSAN recommends rotating the tires every 5,000 miles (8,000 km). (See “Flat tire”  for tire replacing procedures.) As soon as possible, tighten the wheel nuts to the specified torque with a torque wrench. Wheel nut tightening torque: 80 ft-lb (108 N·m) The wheel nuts ...

B2620 Park/neutral position switch
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PERFORM DTC CONFIRMATION PROCEDURE 1. Turn ignition switch ON and wait 2 seconds or more under the following conditions. 2. Set shift lever in the Neutral position and wait for 2 seconds or more. 3. Set shift lever in the Reverse p ...

Inspection
INSPECTION AFTER INSTALLATION • Check accelerator pedal moves smoothly within the whole operation range when it is fully depressed and released. • Check accelerator pedal securely returns to the fully released position. • For the electrical inspection of accelerator pedal position sensor. Refe ...