Rear window defogger indicator does not illuminate

Diagnosis Procedure 1.CHECK A/C CONTROL AND HETER CONTROL SWITCH (REAR WINDOW DEFOGGER SWITCH) Check that rear window defogger operates. Is the inspection result normal? YES >> Replace A/C ...

Filament

Inspection and Repair INSPECTION 1. When measuring voltage, wrap tin foil around the top of the negative probe. Then press the foil against the wire with your finger. 2. Attach probe circuit tes ...

Other materials:

Precaution Necessary for Steering Wheel Rotation after Battery Disconnect
NOTE: • Before removing and installing any control units, first turn the ignition switch to the LOCK position, then disconnect both battery cables. • After finishing work, confirm that all control unit connectors are connected properly, then re-connect both battery cables. • Always use CONS ...

C1143 steering angle sensor
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test. >> GO TO 2. 2.CHECK DTC DETECTION With CONSULT ...

Operation
Autmatic speed control device (ASCD) : Switch Name and Function SWITCHES AND INDICATORS NOTE: Shared with speed limiter switch. 1. CRUISE indicator lamp 2. SET indicator lamp 3. CANCEL switch 4. Speed limiter MAIN switch 5. ASCD MAIN switch 6. SET / − switch (SET / COAST) 7. ...