System description

VENTILATION SYSTEM System Description OUTLINE Ventilation system is controlled by A/C auto amp. (AUTOMATIC AIR CONDITIONING) or A/C control (MANUAL AIR CONDITIONING and MANUAL HEATER). For detai ...

Duct and grille

Exploded View FRONT LHD models 1. A/C unit assembly 2. Side ventilator duct LH 3. Foot duct LH 4. Side defroster nozzle LH 5. Side ventilator grille LH 6. Side defroster grille LH 7. In ...

Other materials:

U1000, U1001 CAN COMM CIRCUIT
Description CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a vehicle, and each co ...

P1811 power supply circuit for 4wd control module
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test. >> GO TO 2. 2.DTC REPRODUCTION PROCEDURE With ...

Additional service when replacing TCM
Description Always perform the following items when the TCM is replaced. CHECK LOADING OF CALIBRATION DATA • The TCM acquires calibration data (individual characteristic value) of each solenoid that is stored in the ROM assembly (in the control valve). This enables the TCM to perform accurat ...