Nissan Juke Service and Repair Manual : Radiator

Thermostat


    Periodical Maintenance Specification
    ENGINE COOLANT CAPACITY (APPROXIMATE) ...

    Other materials:

    Basic inspection
    Description NOTE: Only consult the tests after following the diagnostic procedure chart. Some specific checks are grouped under the ???tests??? heading and are used as required in different diagnostic charts. Work Procedure (TEST 1: Low Pressure Fuel Supply System Check) NOTE: CAUSE ...

    B1180 lap Pre-tensioner RH
    DTC Logic DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSTIC RESULT With CONSULT-III 1. Turn ignition switch ON. 2. Perform Self Diagnostic Result mode of AIR BAG using CONSULT-III. Without CONSULT-III 1. Turn ignition switch ON. 2. Check the air bag warning lamp status. Refer to SRC ...

    Brake fluid level switch
    Component Function Check 1.CHECK BRAKE FLUID LEVEL SWITCH OPERATION When the brake fluid is full or empty. Then check that the brake warning lamp in the combination meter turns ON/OFF correctly. Is the inspection result normal? YES >> INSPECTION END NO >> Proceed to BRC-72, &qu ...