Nissan Juke Service and Repair Manual : Lifting point

Fuel
Gasoline engine (model with three-way catalyst) CAUTION: Do not use leaded gasoline. Using leaded gasoline will damage the three-way catalyst. Use unleaded premium gasoline of at least 95 octane ...

Commercial Service Tools
CAUTION: Every time the vehicle is lifted up, maintain the complete vehicle curb condition. Since the vehicle's center of gravity changes when removing main parts on the front side (engine ...

Other materials:

4WD warning lamp does not turn on
Description 4WD warning lamp does not turn ON when the ignition switch is turned to ON. Diagnosis Procedure 1.CHECK 4WD WARNING LAMP Perform the trouble diagnosis for 4WD warning lamp. Refer to DLN-80, "Diagnosis Procedure". Is the inspection result normal? YES >> Check eac ...

IPDM-E branch line circuit
Diagnosis Procedure 1.CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the terminals and connectors of the IPDM E/R for damage, bend and loose connection (unit side and connector side). Is the inspection result normal? Y ...

P0520 EOP sensor
DTC Logic DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If DTC Confirmation Procedure has been previously conducted, always perform the following procedure before conducting the next test. 1. Turn ignition switch OFF and wait at least 10 seconds. 2. Turn ignition switch ON. 3. Turn ignitio ...