Nissan Juke Service and Repair Manual : Fuel system

Checking Fuel Line

Inspect fuel lines and tank for improper attachment, leaks, cracks, damage, chafing and deterioration.If necessary, repair or replace.

Fuel filter


    Fuel filter
    Exploded View Removal and Installation REMOVAL (RHD) 1. Remove quick connectors in the following procedures. Pinch quick connector square-parts with your fingers, and pull out the quick c ...

    Other materials:

    B2190 nats antenna AMP
    DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PERFORM DTC CONFIRMATION PROCEDURE 1. Turn ignition switch ON. 2. Check DTC in Self Diagnostic Result mode of BCM using CONSULT-III. Is DTC detected? YES >> Refer to SEC-200, "Diagnosis Procedure". NO >&g ...

    Thermostat
    Inspection Place a thread so that it is caught in the valves of the thermostat. Immerse fully in a container filled with water. Heat while stirring. (The example in the figure shows the thermostat.) The valve opening temperature is the temperature at which the valve opens and falls from ...

    EGR volume control valve closed position learning
    Description EGR Volume Control Valve Closed Position Learning is an operation to learn the fully closed position of the EGR volume control valve by monitoring the EGR volume control valve control position sensor output signal. Work Procedure 1.START 1. Turn ignition switch ON. 2. Perform ? ...