Nissan Juke Service and Repair Manual : Exhaust Manifold

EXHAUST MANIFOLD

Camshaft


    Spark Plug
    SPARK PLUG (PLATINUM-TIPPED TYPE) ...

    Camshaft
    *: Total indicator reading Valve Lifter Valve Clearance *:Approximately 80°C (176°F) Available Valve Lifter ...

    Other materials:

    C1105, C1106, C1107, C1108 wheel sensor
    DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test. >> GO TO 2. 2.CHECK DTC DETECTION With CONSULT-I ...

    Hood lock
    Exploded View 1. Hood lock control cable assembly 2. Hood lock assembly : Clip : N·m (kg-m, ft-lb) : Body grease Hood lock HOOD LOCK : Removal and Installation REMOVAL 1. Remove front center grille. Refer to EXT-18, "Removal and Installation". 2. Remove crash zone sensor. Refe ...

    Oil filter
    Removal and Installation REMOVAL 1. Remove engine under cover. 2. Using oil filter wrench [SST: KV10115801] (A), remove oil filter. : Vehicle front CAUTION: • Oil filter is provided with relief valve. Use genuine NISSAN oil filter or equivalent. • Be careful not to get burned when engine and ...