Nissan Juke Service and Repair Manual : Clutch Pedal

*1 : With push-button ignition switch system


*1 : With push-button ignition switch system *2 : With ASCD or with push-button ignition switch system

    Other materials:

    Squeak and rattle trouble diagnoses
    Work Flow CUSTOMER INTERVIEW Interview the customer if possible, to determine the conditions that exist when the noise occurs. Use the Diagnostic Worksheet during the interview to document the facts and conditions when the noise occurs and any of customer's comments; refer to DLK-302, &quo ...

    P0778 pressure control solenoid B
    DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE NOTE: If DTC CONFIRMATION PROCEDURE has been previously performed, always turn ignition switch OFF and wait at least 10 seconds before performing the next test. After the repair, perform the following procedure to confirm the mal ...

    Removal and Installation
    REMOVAL 1. Disconnect accelerator pedal position sensor harness connector. 2. Loosen mounting bolts, and remove accelerator pedal assembly. CAUTION: Never disassemble accelerator pedal assembly. Never remove accelerator pedal position sensor from accelerator pedal assembly. Avoid impac ...