Nissan Leaf 2018-2025 (ZE1) Owner's Manual : Vehicle identification
Vehicle Identification Number (VIN) plate
The Vehicle Identification Number (VIN) plate is securely attached to your Nissan Leaf at the position indicated in the illustration. This unique 17-character identifier serves as the official fingerprint for your vehicle and is a mandatory requirement for all vehicle registration, insurance, and service documentation.
Vehicle identification number (chassis number)
The chassis-stamped vehicle identification number is located in the area shown. To access this number, simply remove the protective cover.
Traction motor serial number
The specific serial number for your electric traction motor is permanently stamped directly onto the motor housing at the location highlighted in the accompanying diagram.
F.M.V.S.S./C.M.V.S.S. Certification label
The Federal/Canadian Motor Vehicle Safety Standards (F.M.V.S.S./C.M.V.S.S.) certification label is affixed to your Nissan Leaf as shown. This label is a comprehensive source of essential vehicle data, including the Gross Vehicle Weight Rating (GVWR), Gross Axle Weight Rating (GAWR) for both front and rear axles, the specific month and year of manufacture, and the official Vehicle Identification Number (VIN). We encourage you to review this information periodically for your records.
Emission control information label
The emission control information label is conveniently attached to the underside of the hood, providing technical details regarding the vehicle's environmental compliance standards.
Tire and Loading Information label
Proper tire maintenance is vital for safety and efficiency. You can find the manufacturer-recommended cold tire pressure specifications on the Tire and Loading Information label, which is affixed to the driver's side center pillar for easy reference.
Air conditioner specification label
The air conditioner specification label is affixed to the underside of the hood, detailing the refrigerant type and system capacity requirements for your Nissan Leaf climate control system.

Air Conditioner Specification Label Symbols
Installing front license plate
To ensure a perfectly aligned and professional installation, there are two distinct dimple marks on the front bumper fascia that indicate the precise location for each mounting screw.
To install the Front License Plate:
Align your license plate with the marked positions and use two 6mm self-tapping screws to securely attach the plate to the bumper fascia of your Nissan Leaf.
NOTE:
Please be aware that self-tapping screws are not included with the vehicle and must be acquired separately.
Recommended fluids/lubricants and capacities
The following values represent approximate capacities for your Nissan Leaf. Please note that actual refill volumes can vary slightly depending on environmental conditions and service methods. When per ...
Vehicle loading information
WARNING
It is extremely dangerous to ride in the cargo area inside the vehicle.
In the event of a collision, individuals positioned in these unsecured areas are significant ...
Other materials:
B1130 side air bag module RH
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.CHECK SELF-DIAG RESULT
With CONSULT-III
1. Turn ignition switch ON.
2. Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT-III.
Without CONSULT-III
1. Turn ignition switch ON.
2. Check the air bag warning la ...
Vehicle security alarm does not activate
Description
Alarm does not operate when alarm operating condition is satisfied.
NOTE:
Check that vehicle is under the condition shown in “CONDITIONS OF VEHICLE
(OPERATING CONDITIONS)”
before starting diagnosis, and check each symptom.
CONDITION OF VEHICLE (OPERATING CONDITIONS)
“SE ...
B27A6, B27A7, B27A8, B27A9 mode door motor
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC is displayed along with DTC U1000, first perform the trouble diagnosis
for DTC U1000. Refer to HAC-
51, "DTC Logic".
• If DTC is displayed along with DTC U1010, first perform the trouble diagnosis
for DTC U1010. HAC-52,
"DTC L ...
