Nissan Juke Service and Repair Manual : Tow truck towing

Board-On Lift
CAUTION: Check vehicle is empty when lifting. • The board-on lift attachment (A) set at front end of vehicle should be set on the front of the sill under the front door opening. • Position atta ...

Tow Truck Towing
CAUTION: • All applicable state or Provincial laws and local laws regarding the towing operation must be obeyed. • It is necessary to use proper towing equipment to avoid possible damage to the ...

Other materials:

Fuel pressure
Work Procedure FUEL PRESSURE RELEASE With CONSULT-III 1. Turn ignition switch ON. 2. Perform “FUEL PRESSURE RELEASE” in “WORK SUPPORT” mode of “ENGINE” using CONSULT-III. 3. Start engine. 4. After engine stalls, crank it two or three times to release all fuel pressure. 5. Turn ignition s ...

Output speed sensor
Exploded View 1. Transaxle assembly 2. Output speed sensor 3. O-ring : Vehicle front : Always replace after every disassembly. : N·m (kg-m, in-lb) : Genuine NISSAN CVT Fluid NS-2 Removal and Installation REMOVAL 1. Disconnect battery cable from negative terminal. Refer to PG-124, &qu ...

Diagnosis Procedure
WARNING: • Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait at least 3 minutes. (To discharge backup capacitor.) • Never use unspecified tester or other measuring device. 1.CHECK HARNESS CONNECTOR Check the harness connector. Is the inspection res ...