Auto retractable door mirror circuit

Component Function Check 1.CHECK FUNCTION 1. Turn the door mirror open/close switch to “AUTO”. 2. Turn ignition switch ON. 3. Select “INTELLIGENT KEY” of “BCM” using CONSULT-III. 4. Select “RETRA ...

Electric foldable door mirror does not operate

Diagnosis Procedure 1.CHECK DOOR MIRROR (OPEN/CLOSE MOTOR) CIRCUIT Check door mirror (open/close motor) circuit. Refer to MIR-25, "Component Function Check". Is the inspection result ...

Other materials:

P0520 EOP sensor
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If DTC Confirmation Procedure has been previously conducted, always perform the following procedure before conducting the next test. 1. Turn ignition switch OFF and wait at least 10 seconds. 2. Turn ignition swit ...

For frontal collision : When SRS is activated in a collision
CAUTION: Due to varying models and option levels, not all parts listed in the chart below apply to all vehicles. WORK PROCEDURE 1. Before performing any of the following steps, ensure that all vehicle body and structural repairs have been completed. 2. Replace the diagnosis sensor unit. ...

On board diagnostic (OBD) system
Description This is an onboard diagnosis system which records diagnosis information related to the exhaust gases. It detects malfunctions related to sensors and actuators. The malfunctions are indicated by means of the malfunction indicator lamp (MIL) and are stored as DTC in the ECU memory. ...