Precaution for Power Generation Voltage Variable Control System

CAUTION: For thailand model, the battery current sensor that is installed to the battery cable at the negative terminal measures the charging/discharging current of the battery, and performs vario ...

System description

...

Other materials:

B2621 inside antenna
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PERFORM DTC CONFIRMATION PROCEDURE 1. Select “INTELLIGENT KEY” of “BCM” using CONSULT-III. 2. Select “INSIDE ANT DIAGNOSIS” in “WORK SUPPORT” mode. 3. Perform inside key antenna (“INSIDE ANT DIAGNOSIS”) on “WORK ...

Encoder circuit
Component Function Check 1.CHECK ENCODER OPERATION Check that front driver side door glass perform AUTO UP/DOWN operation normally when power window main switch is operated. Is the inspection result normal? YES >> INSPECTION END NO >> Refer to PWC-30, "Diagnosis Procedure& ...

Drive belt
Checking Drive Belts WARNING: Be sure to perform when the engine is stopped. 1. Inspect belts for cracks, fraying, wear and oil. If necessary, replace. 2. Evaluate manually if the belt is enough tensioned (tension cannot be measured by way of frequency meter). CAUTION: Auto-tensioner must ...