Nissan Juke Service and Repair Manual : Preparation

Service Notice or Precautions for Transfer
• After overhaul refill the transfer with new transfer oil. • Check the oil level or replace the oil only with the vehicle parked on level surface. • During removal or installation, keep inside of ...

Other materials:

Operation
Autmatic speed control device (ASCD) : Switch Name and Function SWITCHES AND INDICATORS NOTE: Shared with speed limiter switch. 1. CRUISE indicator lamp 2. SET indicator lamp 3. CANCEL switch 4. Speed limiter MAIN switch 5. ASCD MAIN switch 6. SET / − switch (SET / COAST) 7. ...

Precaution Necessary for Steering Wheel Rotation after Battery Disconnect
NOTE: • Before removing and installing any control units, first turn the ignition switch to the LOCK position, then disconnect both battery cables. • After finishing work, confirm that all control unit connectors are connected properly, then re-connect both battery cables. • Always use CONS ...

P0720 output speed sensor
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE CAUTION: Always drive vehicle at a safe speed. NOTE: If “DTC CONFIRMATION PROCEDURE” has been previously performed, always turn ignition switch OFF and wait at least 10 seconds before performing the next test. After the repair, p ...