Service data and specifications (SDS)

Radiator

Other materials:

Power supply and ground circuit
Diagnosis Procedure 1.CHECK 4WD CONTROL MODULE POWER SUPPLY (1) 1. Turn the ignition switch OFF. 2. Disconnect 4WD control module harness connector. 3. Check the voltage between 4WD control module harness connector and ground. 4. Turn the ignition switch ON. CAUTION: Never start the engin ...

Component parts
Component Part Location 1. BCM • With Intelligent Key: Refer to BCS- 6, "BODY CONTROL SYSTEM : Component Parts Location". • Without Intelligent Key: Refer to BCS-96, "BODY CONTROL SYSTEM : Component Parts Location". 2. Magnet clutch 3. Refrigerant pressure sensor 4. ...

P1829 accelerator pedal position sensor
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test. >> GO TO 2. 2.DTC REPRODUCTION PROCEDURE With ...