Nissan Juke Service and Repair Manual : Line Pressure

*: Reference values


*: Reference values

    Other materials:

    Back door opener switch
    Component Function Check 1.CHECK FUNCTION 1. Select “TRUNK” of “BCM” using CONSULT-III. 2. Select “TRNK OPNR SW” in “DATA MONITOR” mode. 3. Check that the function operates normally according to the following conditions. Is the inspection result normal? YES >> Back door opener switch ...

    Inspection
    OIL LEAKAGE Make sure that gear oil is not leaking from transaxle or around it. OIL LEVEL 1. Remove filler plug (1) and gasket from transaxle case. 2. Check the oil level from filler plug mounting hole as shown in the figure. CAUTION: Never start engine while checking oil level. 3. Set a ...

    Sensor rotor
    Front sensor rotor : Removal and Installatio REMOVAL Replace wheel hub as an assembly when replacing because sensor rotor cannot be disassembled. • MR16DDT: Refer to FAX-11, "Removal and Installation". • HR16DE: Refer to FAX-43, "Removal and Installation". • K9K: Refer t ...