Nissan Juke Owners Manual : Increasing fuel economy

• Keep your engine tuned up.

• Follow the recommended scheduled maintenance.

• Keep the tires inflated to the correct pressure. Low tire pressure increases tire wear and lowers fuel economy.

• Keep the wheels in correct alignment.

Improper alignment increases tire wear and lowers fuel economy.

• Use the recommended viscosity engine oil.

(See “Engine oil and oil filter recommendation” .)

    Fuel Efficient Driving Tips
    Follow these easy-to-use Fuel Efficient Driving Tips to help you achieve the most fuel economy from your vehicle. 1. Use smooth accelerator and brake pedal application. •  Avoid rapid starts ...

    All-Wheel Drive (AWD) (if so equipped)
    WARNING •  For AWD equipped vehicles, do not attempt to raise two wheels off the ground and shift the transmission to any drive or reverse position with the engine running. Doing so may resu ...

    Other materials:

    Rear wiper auto stop signal circuit
    Component Function Check 1.CHECK REAR WIPER (AUTO STOP) OPERATION CONSULT-III DATA MONITOR 1. Select “WIPER” of BCM data monitor item. 2. Operate the rear wiper. 3. Check that “RR WIPER STOP” changes to “On” and “Off” linked with the wiper operation. Is the status of item normal? YES > ...

    B26F4 starter control relay
    DTC Logic DTC DETECTION LOGIC NOTE: • If DTC B26F4 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to BCS-83, "DTC Logic". • If DTC B26F4 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to BCS-84, "D ...

    Additional service when replacing ECM
    Description When replacing ECM, this procedure must be performed. Work Procedure 1.PERFORM INITIALIZATION OF NATS SYSTEM AND REGISTRATION OF ALL NATS IGNITION KEY IDS Refer to SEC-50, "BCM : Special Repair Requirement" (With intelligent key system), SEC-190, "BCM : Work Proce ...