Door & Lock Type 1

Precaution

Other materials:

Combination switch output circuit
Diagnosis Procedure 1.CHECK OUTPUT 1 - 5 CIRCUIT FOR OPEN 1. Turn ignition switch OFF. 2. Disconnect BCM and combination switch connectors. 3. Check continuity between BCM harness connector and combination switch harness connector Does continuity exist? YES >> GO TO 2. NO >> ...

Heater control
Exploded View 1. Intake door cable 2. Air mix door cable 3. Mode door cable 4. Heater control 5. Intake door lever knob A. To intake door link B. To air mix door link C. To mode door link Removal and Installation REMOVAL 1. Remove A/C finisher. Refer to IP-13, "Removal and Ins ...

B26F1 ignition relay
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PERFORM DTC CONFIRMATION PROCEDURE 1. Turn ignition switch ON under the following conditions, and wait for 2 seconds or more. CVT models - Selector lever is in the P or N position - Do not depress brake pedal M/T models - Do n ...