Nissan Juke Service and Repair Manual : General Specifications

Preload Torque


    Other materials:

    P0833 CPP switch
    DTC Logic DTC DETECTION LOGIC Diagnosis Procedure 1.CHECK CLUTCH PEDAL POSITION SWITCH GROUND CIRCUIT FOR OPEN AND SHORT 1. Turn ignition switch OFF. 2. Disconnect clutch pedal position switch harness connector. 3. Check the continuity between clutch pedal position switch harness connector ...

    Back door finisher
    Exploded View 1. Rear view camera 2. Back door opener request switch 3. Emblem 4. Back door finisher : Clip : Pawl : Do not reuse Removal and Installation REMOVAL 1. Remove back door trim. Refer to INT-35, "BACK DOOR LOWER FINISHER : Removal and Installation". 2. Remove ba ...

    P2119 electric throttle control actuator
    DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test. >> GO TO 2. 2.PERFORM DTC CONFIRMATION PROCEDURE ...