System description

Engine Cooling System Schematic

Other materials:

Stop lamp switch
Component Function Check 1.CHECK STOP LAMP SWITCH OPERATION Depress brake pedal and check that stop lamp turns ON, or release brake pedal and check stop lamp turns OFF. Is the inspection result normal? YES >> GO TO 2. NO >> Check stop lamp system. Refer to EXL-39, "Wirin ...

Push-button ignition switch position indicator does not illuminate
Description • Before performing the diagnosis in the following table, check “Work Flow”. Refer to PCS-88, "Work Flow". • Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and check each symptom. Conditions of Vehicle ...

Back door opener actuator
Diagnosis Procedure 1.CHECK BACK DOOR OPENER ACTUATOR INPUT SIGNAL 1. Turn ignition switch OFF. 2. Disconnect back door opener assembly connector. 3. Check voltage between back door opener assembly harness connector and ground. Is the inspection result normal? YES >> GO TO 3. NO > ...