Diagnosis system (BCM) (without intelligent key system)

Common item : consult-III Function (BCM - COMMON ITEM) APPLICATION ITEM CONSULT-III performs the following functions via CAN communication with BCM. SYSTEM APPLICATION BCM can perform the follow ...

A/C auto AMP.

Reference Value CONSULT-III DATA MONITOR REFERENCE VALUES *: “DUTY” is displayed, but voltage is indicated. Or unit is not displayed but unit is (V). TERMINAL LAYOUT PHYSICAL VALUES *: ...

Other materials:

P183B solenoid power supply
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test. >> GO TO 2. 2.DTC REPRODUCTION PROCEDURE With ...

U1010 control unit (can)
Description Initial diagnosis of A/C auto amp. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PERFORM SELF-DIAGNOSIS With CONSULT-III 1. Turn ignition switch ON. 2. Select “Self Diagnostic Result” mode of “PTC HEATER” using CONSULT-.III 3. Check DTC. Is DTC detected? YES & ...

Hazard switch
Exploded View 1. Instrument panel assembly 2. Hazard switch : Pawl Removal and Installation REMOVAL 1. Remove Audio unit. Refer to AV-38, "Removal and Installation". 2. Disengage fixing pawls, and then remove hazard switch from instrument panel inside to outside. INSTALLATIO ...