Nissan Juke Service and Repair Manual : Cruise Control System

SYSTEM DESCRIPTION

Information

Automatic Speed Control Device (ASCD) system is controlled by ECM.

Regarding the information for ASCD system, refer to EC-64, "AUTOMATIC SPEED CONTROL DEVICE (ASCD) : System Description".

    Removal and installation
    MULTI DISPLAY UNIT Exploded View REMOVAL Refer to IP-12, "Exploded View". DISASSEMBLY 1. Silencer tape 2. Multi display unit 3. Silencer tape 4. Clip 5. Control finisher Rem ...

    Other materials:

    Insufficient cooling
    Description Symptom Insufficient cooling No cool air comes out. (Air flow volume is normal.) Diagnosis Procedure NOTE: Perform self-diagnoses with CONSULT-III before performing symptom diagnosis. If any DTC is detected, perform the corresponding diagnosis. 1.CHECK MAGNET CLUTCH OPERA ...

    B2099 ignition relay off stuck
    Description IPDM E/R operates the ignition relay when it receives an ignition switch ON signal from BCM via CAN communication. Turn the ignition relay OFF by pressing the push-button ignition switch once when the vehicle speed is 4 km/ h (2.5 MPH) or less. Turn the ignition relay OFF w ...

    Operating range for engine start function
    The Intelligent Key can only be used for starting the engine when the Intelligent Key is within the specified operating range1 . When the Intelligent Key battery is almost discharged or strong radio waves are present near the operating location, the Intelligent Key systems operating range ...