Nissan Juke Service and Repair Manual : Commercial Service Tools


System description


    Other materials:

    P2080 EGT sensor 1
    DTC Logic DTC DETECTION LOGIC Diagnosis Procedure 1.CHECK GROUND CONNECTIONS 1. Turn ignition switch OFF. 2. Check ground connection E38. Refer to Ground inspection in GI-44, "Circuit Inspection". Is the inspection result normal? YES >> GO TO 2. NO >> Repair or ...

    P2118 throttle control motor
    DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If DTC Confirmation Procedure has been previously conducted, always perform the following procedure before conducting the next test. 1. Turn ignition switch OFF and wait at least 10 seconds. 2. Turn ignition swit ...

    Cooling fan
    Component Function Check 1.CHECK COOLING FAN FUNCTION With CONSULT-III 1. Turn ignition switch ON. 2. Perform “COOLING FAN” in “ACTIVE TEST” mode with CONSULT-III. 3. Touch “LOW” and “Hi” on the CONSULT-III screen. 4. Check that cooling fan operates at each speed. Without CONSULT-III 1. Pe ...