Special Service Tools

...

Periodic maintenance

EXHAUST SYSTEM Inspection Check exhaust pipes, muffler, and mounting for improper attachment, leakage, cracks, damage or deterioration. • If anything is found, repair or replace damaged parts. ...

Other materials:

P1574 ASCD vehicle speed sensor
Description The ECM receives two vehicle speed sensor signals via CAN communication line. One is sent from combination meter, and the other is from TCM (Transmission control module). The ECM uses these signals for ASCD control. Refer to EC-477, "AUTOMATIC SPEED CONTROL DEVICE (ASCD) : Sy ...

Precaution for Power Generation Voltage Variable Control System
CAUTION: For thailand model, the battery current sensor that is installed to the battery cable at the negative terminal measures the charging/discharging current of the battery, and performs various controls. If the electrical component or the ground wire is connected directly to the battery ...

P2119 electric throttle control actuator
DTC Logic DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If DTC Confirmation Procedure has been previously conducted, always perform the following procedure before conducting the next test. 1. Turn ignition switch OFF and wait at least 10 seconds. 2. Turn ignition switch ON. 3. Turn ignitio ...