To protect your vehicle from corrosion

• Wash and wax your vehicle often to keep the vehicle clean.• • Always check for minor damage to the paint and repair it as soon as possible.• •  Keep drain holes at the bottom of the doors o ...

Maintenance requirement

Some day-to-day and regular maintenance is essential to maintain your vehicle good mechanical condition, as well as its emission and engine performance. It is the owner’s responsibility to make sur ...

Other materials:

Line pressure test
Inspection and Judgment INSPECTION Line Pressure Test Port Line Pressure Test Procedure 1. Inspect the amount of engine oil and replenish if necessary. 2. Drive the car for about 10 minutes to warm it up so that the CVT fluid reaches in the range of 50 to 80°C (122 to 176°F), then inspect ...

Wheelarch Height
2WD Measure value under unladen* conditions. *: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions. 4WD Measure value under unladen* conditions. *: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand t ...

Precaution Necessary for Steering Wheel Rotation after Battery Disconnect
NOTE: • Before removing and installing any control units, first turn the ignition switch to the LOCK position, then disconnect both battery cables. • After finishing work, confirm that all control unit connectors are connected properly, then re-connect both battery cables. • Always use CONS ...