Nissan Juke Owners Manual : Fuses

Brake pad wear warning
The disc brake pads have audible wear warnings. When a brake pad requires replacement, it will make a high pitched scraping sound when the vehicle is in motion. This scraping sound will first occur ...

Engine compartment
CAUTION Never use a fuse of a higher or lower amperage rating than that specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does ...

Other materials:

P0112, P0113 IAT SENSOR
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test. >> GO TO 2. 2.PERFORM DTC CONFIRMATION PROCEDURE ...

Idle air volume learning
Description Idle Air Volume Learning is a function of ECM to learn the idle air volume that keeps each engine idle speed within the specific range. It must be performed under any of the following conditions: Each time electric throttle control actuator or ECM is replaced. Idle speed or ...

Vehicle speed sensing auto lock operation does not operate
Diagnosis Procedure 1.CHECK AUTOMATIC LOCK/UNLOCK SELECT SETTING IN WORK SUPPORT 1. Select DOOR LOCK of BCM using CONSULT-III. 2. Select AUTOMATIC LOCK/UNLOCK SELECT in WORK SUPPORT mode. 3. Check AUTOMATIC LOCK/UNLOCK SELECT in WORK SUPPORT. Refer to DLK-217, "DOOR LOCK ...