Nissan Leaf 2018-2025 (ZE1) Owner's Manual : Windshield-washer fluid
Maintain clear visibility by checking and filling the windshield-washer fluid reservoir periodically. You should replenish the reservoir promptly when the "Low Washer Fluid" notification appears on the Nissan Leaf vehicle information display.
For more details on interpreting these alerts, please see "Vehicle information display warnings and indicators".
To fill the reservoir, lift cap (1) and pour the windshield-washer fluid directly into the reservoir opening until full.
For superior cleaning performance, add a high-quality windshield-washer solvent to the reservoir. During the winter season, it is essential to use a windshield-washer fluid with antifreeze properties to prevent the solution from freezing in the lines or on the glass.
Always follow the product manufacturer's specific instructions regarding the proper mixture ratio for your climate.
You may need to refill the reservoir more frequently during periods of inclement weather, long-distance highway driving, or road conditions that require an increased use of the washer system.
Recommended fluid: Genuine NISSAN Windshield-Washer Concentrate Cleaner & Antifreeze or a high-quality equivalent.
CAUTION
- Never substitute engine antifreeze coolant for windshield-washer solution, as it will cause severe and permanent damage to your Nissan Leaf paint finish.
- Do not pour concentrated windshield-washer fluid directly into the reservoir. Some methyl alcohol-based concentrates are highly aggressive; if spilled while filling, they may cause permanent staining or discoloration of the vehicle grille or surrounding trim.
- Always pre-mix concentrated washer fluid with water according to the manufacturer's recommended ratios in a separate container before adding it to the vehicle. Never use the windshield-washer reservoir itself as a mixing vessel.
Brake fluid
For comprehensive technical specifications and details regarding recommended fluids, lubricants, and system capacities for your Nissan Leaf, please refer to the "Recommended fluids/lubricants and capa ...
12-volt battery
Maintain the external surface of the 12-volt battery in a clean and dry condition. Should corrosion appear on the terminals or casing, clean the battery using a mild so ...
Other materials:
Supplemental air bag warning labels
Supplemental front-impact air bag system warning labels
Supplemental air bag warning light
The supplemental air bag warning light, identified by the icon
located on the instrument panel, serves as a comprehensiv ...
U1000 can comm circuit
Description
CAN (Controller Area Network) is a serial communication line for real time
application. It is an on-vehicle multiplex
communication line with high data communication speed and excellent error
detection ability. Many electronic
control units are equipped onto a vehicle, and each co ...
C1140 actuator relay system
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.PRECONDITIONING
If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn
ignition switch OFF and
wait at least 10 seconds before conducting the next test.
>> GO TO 2.
2.CHECK DTC DETECTION
With CON ...
